Skip to main content
On a slow or spotty connection?
Mid-range

Anker SOLIX C1000 Portable Power Station

A 1,056Wh power station that can add a second battery later, which the newer Gen 2 can't. OutdoorGearLab got 897Wh out of it and timed a 65-minute wall recharge.

  • Power outage
  • 72-hr kit
  • Apartment

Our score: 4 out of 5

Does the job in an outage
4.5
Holds up
3.5
Easy to use under stress
3.5
Value for what it does
4
How we score

Who this is for

Households wanting about 1 kWh now, with the option to double it later with Anker's expansion battery.

Skip if

Anyone that wants the fastest refill or a quiet fan: the Gen 2 refills faster, and this fan gets loud under heavy load.

Anker SOLIX C1000 Portable Power Station

Evaluated for household use · Affiliate links disclosed

The 1-kWh Anker that can add a second battery

Why we chose it

It's the 1-kWh Anker that takes the BP1000 expansion battery, for 2,112Wh in all, and it still refills from the wall in about an hour (OutdoorGearLab timed 65 minutes).

Buy From

Anker

Also available at

Affiliate links · We earn a small commission at no cost to you. How this works
We evaluate every pick for real-world reliability.

How We Evaluated

How we evaluated this

We researched the C1000 the way we'd size one up before buying it for our own house: Anker's product and warranty pages for what it is, and measured tests from OutdoorGearLab and Jasonoid for how it behaves. Jasonoid's three-way test, which includes this C1000, is in the photo gallery at the top of this page. We also read the newest 100 low-star Amazon reviews and RV Outfitting's roundup of owner reports. We don't have hands-on time with it yet, so every figure is credited to Anker or the tester that measured it.

OutdoorGearLab says it buys every product it tests. Jasonoid earns from affiliate links.

Our pick: Anker SOLIX C1000 Portable Power Station

The verdict

The original C1000 is a 1,056Wh power station with one thing the newer Gen 2 dropped: you can add Anker's BP1000 expansion battery later, for 2,112Wh in all. It also keeps a built-in light. It refills fast enough for stop-and-start outages. Anker rates a full wall charge at 58 minutes in UltraFast mode, and OutdoorGearLab timed 65 (88 in standard mode). OutdoorGearLab got 897Wh out of it. Set it up before you need it. Its power-saving mode can switch off a low-draw load like a 12V fridge, and most settings live in the Anker app. It's a better outage battery than a computer UPS: Jasonoid measured a 19.2 ms switchover.

Strengths
  • Takes the BP1000 expansion battery, for 2,112Wh in all
  • 897Wh measured out of 1,056Wh (OutdoorGearLab)
  • Six AC outlets, a 12V socket and a built-in light
  • 5-year warranty once registered
Limitations
  • Power-saving mode can switch off low-draw loads until you change it in the app
  • Loud fan under heavy load (62 dB at 1,800W, Jasonoid)
  • Slower UPS switchover: 19.2 ms measured by Jasonoid
  • App connection trouble is a common owner complaint

What it does well

It can grow. Anker says the BP1000 expansion battery takes it to 2,112Wh. Jasonoid points out the port takes one extra battery.

It handles its rated load. Jasonoid ran an 1,800W load on it with a clean sine wave, and OutdoorGearLab got 897Wh out of the 1,056Wh pack (85%).

It has the ports an outage calls for: six AC outlets, a 100W USB-C port, a 12V car socket and a built-in light. Jasonoid got the full 600 watts from solar.

What to know before you buy

  • Turn off power saving before an outage. Owners and RV Outfitting report it can switch off low-draw loads, like a 12V fridge or a USB light, until you change the setting in the Anker app.
  • It's a slow UPS. Jasonoid measured a 19.2 ms switchover, against 8.7 ms for the BLUETTI AC180 in the same test. A few owners say a computer or modem dropped during the switch, or that the AC outlets didn't come back on by themselves after the battery ran flat. It's fine for lights and a fridge; test it before you trust it with a computer.
  • The fan is loud under heavy load. Jasonoid measured 62 dB at an 1,800W load, against 51 dB for the AC180. OutdoorGearLab called it one of the loudest it tested at max output.
  • Most settings need the app. UltraFast charging needs the Anker app and a battery between 68°F and 122°F, per Anker's listing. Many owners report Wi-Fi or Bluetooth connection trouble, so set it up at home.

This, the Gen 2, or the DELTA 3 Classic?

All three hold about 1 kWh. Pick this C1000 if you might add a battery later: it's the only one of the three that takes one. Pick the Gen 2 for a faster refill and a lighter body (49 minutes and 24.9 pounds, per Anker), or the DELTA 3 Classic if a fast UPS switchover for a computer matters most, since EcoFlow rates it under 10 ms.

How long will it run my stuff?

Plan on about 900Wh, close to the 897Wh OutdoorGearLab got out of it. Divide that by what your gear draws:

  • A 1,500W space heater: a little over half an hour. Owners report 30 minutes to an hour.
  • Its full 1,800 watts: OutdoorGearLab ran it 33 minutes before it shut off.
  • About 100 watts (a router, a few lights and a laptop): about 9 hours.
  • With the BP1000 added: Anker rates 2,112Wh in all, so roughly twice as long.

What owners report

It has been on sale since at least mid-2024, and most Amazon owners are happy with it. Its newest low-star reviews show a steady trickle of units that wouldn't turn on or quit within the first year, about a dozen over nearly two years, which the warranty covers. The most common complaint is the app: Wi-Fi drops and Bluetooth pairing trouble. A few owners also say the BP1000 stopped charging after months of use, so register both.

Other options to consider

  • EcoFlow DELTA 3 Classic

    Our main 1-kWh pick. EcoFlow rates its UPS switchover under 10 ms, but it can't take an expansion battery and has no 12V car socket.

    Read full review →
  • Anker SOLIX C1000 Gen 2

    The newer Anker 1-kWh model. Anker rates its wall recharge at 49 minutes against this one's 58, and it puts out 2,000W against 1,800W. The trade: it can't take the BP1000 expansion battery and has no built-in light.

    Read full review →

Longevity

How long will this actually last

Anker rates the battery for 3,000 cycles to 80% of its capacity, and backs it with a 5-year warranty once you register it. The warranty only holds in the country where you bought it. Most people keep a power station like this for a few years, so the warranty covers a typical ownership.

For storage, Anker says to turn off all outputs, keep it dry and cool, check it weekly, and charge it to 100% if it drops below 30% and at least once every three months. It won't charge below freezing.

Questions people actually ask

Can I add a second battery later?
Yes. Anker says the BP1000 expansion battery takes it to 2,112Wh in all. That's the main reason to pick this model over the Gen 2, which can't take one.
Will it run a 12V fridge overnight?
It can: the 12V car socket is rated at 120 watts. Turn off the power-saving shutoff in the Anker app first. Owners report it can switch off a low-draw load like a 12V fridge overnight.
Can I use it as battery backup for a computer or a CPAP?
It works as backup, but Jasonoid measured a 19.2 ms switchover, and a few owners say computers dropped during the switch. Use it only for CPAP-class loads, never life-support equipment, and test it with your own machine first.
Is this the same as the C1000X or the Gen 2?
Check the capacity on the box. Anker's page for this model calls it the C1000X, and it's 1,056Wh. The C1000 Gen 2, including the C1000X Gen 2 sold in big-box stores, is a different 1,024Wh unit.

Technical Specifications

Capacity1,056Wh rated; 897Wh measured at the outlets (Anker; OutdoorGearLab)
AC Output1,800W; 2,400W surge via SurgePad, for heat-type loads (Anker)
AC Outlets6 (Anker)
USB And CarUSB-C 100W and 30W, 2 USB-A at 12W, 12V car socket at 120W (Anker)
Wall Recharge58 min rated with UltraFast (Anker); 65 min UltraFast / 88 min standard measured (OutdoorGearLab)
Max AC Input1,300W (Anker)
Solar InputUp to 600W, 11-60V (Anker); full 600W reached (Jasonoid)
UPS Switchover19.2 ms measured (Jasonoid); Anker lists no figure
ExpansionBP1000 expansion battery, up to 2,112Wh total (Anker)
Cycle Life3,000 cycles to 80% (Anker)
Weight28.44 lb (Anker); 28.65 lb on OutdoorGearLab's scale
TemperatureDischarge -4 to 104°F; charge 32 to 104°F (Anker)
Warranty5 years once registered; valid in the country of purchase (Anker)

Sources we consulted

We may earn a commission when you buy through links on this page. How this works

Anker SOLIX C1000 Portable Power Station

Evaluated for household use · Affiliate links disclosed

The 1-kWh Anker that can add a second battery

Why we chose it

It's the 1-kWh Anker that takes the BP1000 expansion battery, for 2,112Wh in all, and it still refills from the wall in about an hour (OutdoorGearLab timed 65 minutes).

Buy From

Anker

Also available at

Affiliate links · We earn a small commission at no cost to you. How this works
We evaluate every pick for real-world reliability.